Gel Lack True Blue 6ml

Primer Ultra Bond + Vitamins 10ml Juliana Nails Primer Ultra Bond with Vitamins is a liquid, low-acid coupling agent enriched with particularly nourishing Vitamin E and Vitamin B5. It has a slightly thicker consistency than the Primer Ultra Bond, has no smell and leaves a slightly sticky surface on the natural nail. Particularly suitable for gel polish and sensitive nails. Available in a glass bottle with a brush (10ml). How to make acrylic nails? Wash and disinfect your hands. Prepare your natural nail by pushing back the cuticle and thoroughly removing it. After that, you can gently buff your nail with the Buffer and file your natural nail to prepare it for the tip that will be glued right after. When gluing, you should pay attention to the correct size of the tip and ensure that there are no bubbles under the glue. Next, file the transition between the tip and the natural nail so that it is almost invisible and then file the tip in the desired shape. Use a nail brush to thoroughly remove the resulting dust from your nails. Apply a primer and leave it to dry for about one minute. Now dip the brush in Nail Liquid and brush it along the surface of the powder until a medium-sized glossy ball forms on the tip of the brush. Position the ball on the nail and spread it around with a brush. You can repeat this process until you achieve the desired shape. After shortly drying your nail, you can file it and seal it either by polishing it with a Polishing Block, with a Top Coat or, if you have a UV-lamp, with a sealing gel. How to work with gel polish: Wash and disinfect your hands Firstly, the natural nail should be prepared by pushing back the cuticle and removing it. After that, lightly buff and dust the nail. Apply a thin layer of a primer and allow it to dry for 20 seconds. Apply a thin layer of the Base & Finish gel polish without getting to the cuticle and cure it for 120 seconds in a UV-lamp or 60 seconds in a LED-lamp. Apply a thin coat of a gel polish carefully onto the nail and allow it to dry for 120 seconds in a UV-lamp or 60 seconds in a LED-lamp. If you find it necessary, you can repeat this step. As a final step, apply the Base & Finish gel polish again. Pay attention to the tip of the nail and cover the nail well. This layer is also cured for 120 seconds in a UV-lamp or 60 seconds in a LED-lamp. Lastly, remove the sticky layer with our Gel Cleaner. Gel modeling with tips: Wash and disinfect your hands. Prepare your natural nail by pushing and removing the cuticle thoroughly. Carefully matt your nail with the buffer and shorten it for the tip if necessary. When gluing, you should pay attention to the correct size of the tip and ensure that there are no glue bubbles. Then file the transition from the tip to the natural nail so that the transition is almost no longer visible and file the tip into the desired shape. Apply primer (allow to air dry for approx. 1 - 1.5 minutes) Apply the gel in a thin layer, as a primer. When applying, make sure to leave the nail edges free, but to cover the nail tip well. If you are satisfied with your result, cure the gel in the UV lamp for 120 seconds. In the second layer, apply more gel in the middle of the nail or at the stress point to form the nail. The gel should be thinner towards the edges. Then cure it for 2 min. (If you look at the nail from the side, you should see a so-called C curve). After that, remove the sweat layer with the help of the gel cleaner. File the nail into the desired shape and use the buffer to compensate for filing marks. As the last layer, apply the gel again thinly as a seal on the nail and cure it for 2 min. Remove the sticky layer with the gel cleaner. For video instructions on how to use the stencils, click here.